(Melamine) Laminate Saw Blades
A higher angle on top bevel (+30 degrees) gives this saw an extra sharp shearing action
to slice through single or double sided laminates without chipping. These blades
are good for laminates, melamine, coreboard, and other composite materials. Made
with Micro-Sheen C-4 sub-micron carbide for longer life.
Laminate Saw Blade Specification Chart
Call For Pricing
| DIAMETER | TEETH | DESIGN | KERF | PLATE | BORE | HOOK | ORDER ID |
| 180mm | 36T | **HF | 2.9mm | 2.0mm | 30mm | -5 | LM18036HF |
| 8" | 64T | HATB | .118" | .079" | 5/8" | -5 | LM864 |
| 220mm | 42T | **HF | 3.2mm | 2.2mm | 30mm, 2/7/42 | 10 | LMH22042* |
| 220mm | 64T | HATB | 3.0mm | 2.2mm | 30mm, 2/7/42 | -5 | LM22064* |
| 250mm | 80T | HATB | 3.2mm | 2.2mm | 30mm, 2/7/42 | -5 | LM2503080* |
| 10" | 48T | **HF | .126" | .087" | 5/8" | 10 | LM1048HF |
| 10" | 80T | HATB | .102" | .071" | 5/8" | 0 | LM1080X |
| max. cut 1" | |||||||
| 10" | 80T | HATB | .126" | .087" | 5/8" | -5 | LM1080 |
| 10" | 80T | TCG | .126" | .087" | 5/8" | -5 | LM1080TCG |
| 300mm | 60T | **HF | 3.2mm | 2.2mm | 30mm, 2 +2 PH | 10 | LMH30060 |
| 300mm | 80T | HATB | 3.2mm | 2.2mm | 30mm, 2 +2 PH | -5 | LM30080* |
| 300mm | 100T | HATB | 3.2mm | 2.2mm | 30mm, 2 +2 PH | -5 | LM30010* |
| 12" | 80T | HATB | .134" | .094" | 1" | -5 | LM1280 |
| 12" | 100T | HATB | .134" | .094" | 1" | -5 | LM1210 |
| 350mm | 96T | HATB | 3.6mm | 2.8mm | 30mm, 2+2 PH | -5 | LM3503096 |
| 14" | 100T | HATB | .142" | .110" | 1" | -5 | LM1410 |
| 16" | 100T | HATB | .158" | .118" | 1" | -5 | LM1610 |
* For use on Holz-Her or Striebig vertical panel
saw.
** Hollow Face
** Hollow Face Pinholes on 220mm are 2/7/42mm & on 300mm 2/7/42 + 2/10/60mm
We specialize in sharpening general to professional saw blades & router bits, manufacturing custom router bits, and selling new melamine / laminate saw blades, router bits, woodworking tools, & metal cutting circular saws.
At Dynamic Saw, We Make The Cutting Edge!
